3 Oddball Tricks for Sharpening Hedge Trimmer Blades
Hedge trimmer blades that are sharpening is something which most folks will not have to do very often – after all, that is not a piece of gear that you will use for long amounts of time and frequently. Nevertheless, knowing just how to sharpen the blades your self when it comes time to get it done, will help save you lots of time and money. Getting this done with a professional, particularly during their more active times of the entire year, could be expensive and place your equipment out of action.
The best way to achieve this is always to test out your hedges and plants after they have been cut by you. In the event the leaves appear ragged or torn, then your blades have become blunt and the should be sharpened.
As hedge trimmers are dangerous bits of equipment, you will need to ensure you’re wearing the proper safety gear whenever performing care. Thick work gloves and safety goggles are adequate, for sharpening the blades. It’s also important to not forget to never work on your own hedge trimmer whilst it’s not cold – wait for the motor to be completely cool. The blades are easily removed by undoing the bolts keeping it in place.
There are 2 ways to sharpen your hedge trimmer blades – using a rotary device, or by hand, with a metal file. The procedures, nevertheless, are reasonably similar. When utilizing a rotary tool:
Add a abrasive point to the head of your rotary device and tighten
Switch the rotary device on in order that it mirrors the angle of the cutting teeth on the trimmer, which is usually about 45 degrees, and angle the stage
Run the rotary instrument along equally surfaces that are cutting on each and every tooth, utilizing a constant pressure
flip the blades over and repeat on the bottom cutting teeth
When utilizing a metal file (about 7″ long):
Move the file over the slicing surface on every tooth; when clean, new steel is revealed, go onto the next tooth
flip the blades over and repeat on the bottom cutting teeth
You must always apply a thin coat of oil after sharpening to make sure your hedge trimmers work at their optimum. To to displace the blades, simply bolt them back into the trimmer’s frame and you’re all set.
To see more regarding Signworld America (https://www.youtube.com/) check out our own web site.
Group Admins
-
Marla Fulcher created the group
Signworld America 9 years, 1 month ago